| Features |
|---|
| • ALL CYLINDER RODS ARE CHROME PLATED |
| • CYLINDERS HAVE REMOVABLE HEAD GLANDS FOR EASE OF SERVICING |
| • UNIT SHELL COMPONENTS SUCH AS SIDE PANELS, ARM PANELS AND FLOOR SHEET ARE MADE OF ASTM A572 Gr50. |
| • JACKLEG CYLINDERS USE LINKS TO KEEP THEM IN PLACE NOT “FREE SWINGING” STYLE (STANDARD ON ALL UNITS OVER 20,000# CAPACITY). |
| • JACKLEG CYLINDERS ARE MOUNTED WITH ROD END UP INTO JACKLEG HOUSING TO PROTECT THE ROD. |
| • ALL UNITS 40,000# CAPACITY AND OVER HAVE HI-FLOW HYDRAULIC COMPONENTS FOR FASTER CYCLE TIME. |
| • TAIL LIGHTS ARE LOCATED IN JACKLEG HOUSING TO MEET WITH FMVSS 108 REQUIREMENTS. |
| • AIR PREATHER FILTER ON HYDRAULIC TANK AND 10 MICRON RETURN LINE FILTER. |
| • HYDRAULIC VALVE IS AIR ACTUATED WITH IN-CAB CONTROL LEVERS. |
| • ARM CYLINDERS AND LOWER LOAD SHAFT USE ALUMINUM/BRONZE (CA-954) BEARINGS, NOT SAE 660 BRONZE. |
| • USING CA-954 BEARINGS ALLOWS FOR HEAVIER LOADS AND LONGER BEARING LIFE. |
| • SUCTION STRAINER PROVIDED IN OIL TANK. |
| • IN ARM CONTACT CYLINDERS WITH “J” HOOKS FOR DUMPING |
| • UPPER SHAFT SADDLE BLOCKS HAVE ALUMINUM/BRONZE BEARINGS. |
| • LOWER ARM PIVOT, “PINNED” TO LOWER LOAD SHAFT, NOT CLAMPED. |
| • HYDRAULIC SYSTEM PRESSURE IS 2500 PSI, AND SUPPLIED WITH A DIRECT MOUNTED GEAR PUMP. |
| • ALL UNITS PLUMBING SUPPLIED WITH HYDRAULIC TUBING AND SAE 37 DEGREE (JIC) FITTINGS. |
| • LUGGER SUBFRAME LONGMEMBERS ARE 10″ @ 15.3# STRUCTURAL CHANNEL WITH 4″ @ 5.4 STRUCTURAL CHANNEL CROSS MEMBERS. |
| • UNIT FLOOR IS 3/16″ THICKNESS A572 Gr50 50,000 PSI YIELD MATERIAL FOR 30,000# AND OVER CAPACITY. |
| • UNIT FLOOR IS 1/4″ THICKNESS A572 Gr50 50,000 PSI YIELD MATERIAL FOR 40,000# AND OVER CAPACITY. |
| • REAR FORMED APRON IS 5/16″ THICKNESS ASTM A572 Gr50, 50,000 PSI YEILD MATERIAL. |
| • UNIT ONE PIECE SIDE PANEL/CYLINDER HOUSING IS 5/16″ THICKNESS ASTM A572 Gr50 50,000 PSI YEILD MATERIAL FOR 30,000# AND LESS CAPACITY. |
| • UNIT ONE PIECE SIDE PANEL/CYLINDER HOUSING IS 3/8″ THICKNESS ASTM A572 Gr50 50,000 PSI YEILD MATERIAL FOR 40,000# AND LESS CAPACITY. |
| • HYDRAULIC HOSES RATED 3,000 PSI |
| • SANDBLAST, PRIME AND PAINT 3 PART POLYURETHANE |
| • LED LIGHTS |
| • CAB GUARD MOUNTED AT FRONT OF LUGGER BED FOR SAFETY |
| • OTHER MODELS AND CAPACITIES AVAILABLE BASED ON CUSTOM APPLICATION AND CUSTOMER REQUIREMENTS. |
Options
- Tarping System
- Auto Inflation
- Center Floor Mounted Trip Hook
- Hook & Line
- Tool Box
- Work Lights
- Aluminum Wheels
- Cat Walks Over Arm Cylinders
We reserve the right to make changes at any time without notice.